We strongly recommend that content uploaded to JustClickPrinting.com meets the following standards.
At a minimum of 300 DPI at 1:1 ratio (or 100%). Content that does not meet this standard may experience print or images that are fuzzy, pixilated or otherwise distorted for which Just Click Printing does not accept any responsibility. We reserve the right to reject content that does not meet this standard, but we do not assume any obligation to verify that the content meets this criterion.
Designed in CMYK and uploaded to JustClickPrinting.com in CMYK with no embedded color profile. (You may upload in RGB or some other standard if you choose, however, the color will be converted and JustClickPrinting.com is not responsible for any inaccuracy or color shift that occurs as a result of the conversion).
We recommend saving as a .PDF you may also send the file in the following types: jpg, jpeg, tif, tiff, eps, and png. We prefer that you send .PDF with embedded or outlined fonts. .PDF’s are easier to handle and will likely speed up your turn-around. Remember to add crop marks and flatten your files before uploading.
Rich black is an ink mixture of solid black, 100% K, with additional CMY ink values. This results in a darker tone than black ink alone. If you print black alone as 100% K, the resulting black may not be as dark as you might like. We recommend using C 60 M 40 Y 40 K 100. This will give you a deep, dark, rich black.
Blue can sometimes turn out purple.
When using a blue in your design, always make sure to leave at least a 30% difference in your Cyan and Magenta values. 100% C 100% M 0% Y 0% K. Blue is close to purple in the CMYK spectrum. Remember, use a low amount of magenta whenever using high amounts of cyan to avoid purple. Example: C-100 M-70 Y-0 K-0
Bleed must extend past the cut-line and will be trimmed from the product during the final cutting phase. When the image is required to extend all the way to the edge, bleed is needed to preserve the finished look and the quality of the final product. Please keep all text at least 0.125″ inside the cut-line.
– The bleed for Standard Products is 0.125″ or 0p6 in picas.
– The bleed for Booklets and Presentation Folders is 0.25″.